|
|
|
 Click picture to enlarge |
Introduction:
LitSource Technology now launches the GD Series LED Dimmer with a wild range use of the delicate AOI (Automatic Optical Inspection) System/Equipment.
The digital operation interface is easily use for engineers to quickly adjust the value of current and brightness with excellent precision.
The Constant Output Current is programmed in Analog and Linear Methods instead of the PWM control to avoid the Low Frequency Blinking at Low Output Current.
Can use the operation software on PC to remote set and control the GD Series Dimmer through the RS-232 communication port.
Build in the Automatic Power Detection/Management System to avoid the damage of lighting fixture caused by Over Current/Voltage.
Each channel can manually turn on/off the lighting fixture by using the External Trigger Port.
Optional code description:
GD: General Model, MD: Mini Model, HD: Hyper trigger Model
2075: 2 channels, 75 watt / 4075: 4channels, 75watt / 2150: 2channels, 150 watt
A0: Auto voltage detect (3.5V/12V/24V), firmware version 0 / B1-12V: Single voltage 12V, firmware version 1
Parameters:
Characteristic |
Model |
Unit |
GD4045BX |
Input voltag |
100 ~ 240V, 50 / 60Hz |
ACV |
Power consumption |
45 |
W |
Channel |
4 |
Channel |
Max. current per CH |
650mA |
mA |
Brightness control |
Constant current |
|
Dimming switch |
Rotary Encoder |
|
External control |
RS-232 |
|
External triggerMax. Delay time |
ON / 10msOFF / 10ms |
|
Operating temperature |
0 ~ +55 (nonfreezing) |
℃ |
Storage temperature |
-20 ~ +65 (nonfreezing) |
℃ |
Operating humidity |
< 90%RH (incondensable) |
RH |
Storage humidity |
< 90%RH (incondensable) |
RH |
Environment require |
Indoor, without corrosive gas, flammable gas, associated gas and dust |
|
Dimmer dimension: (Click picture to enlarge)
 |
|
